Do you know the polishing techniques of these acrylic plates?

Acrylic plates are polished, bright and bright, and the light transmittance can reach more than 92%. It is usually used in the production of various display racks and boxes. The polished acrylic plate can be extended to prolong its service life. The common polishing techniques for acrylic plates are as follows: flame polishing, cloth wheel polishing, diamond polishing, and manual polishing.

1. Acrylic board flame polishing

Flame polishing is mainly to use high temperature to process the acrylic plate. The acrylic plate through flame polishing is bright, beautiful but not fine enough. It is mostly used for artistic crystal character polishing. Flame polishing is fast and convenient, but it requires higher skills of workers in operation, and a little carelessness will cause damage to the finished product.

2. Acrylic plate cloth wheel polishing

When polishing by the cloth wheel machine, first apply the polishing wax evenly on the cloth wheel machine. Workers can perform different degrees of polishing treatment on different parts of the acrylic plate. The operation of the cloth wheel machine is relatively safe, and the operation is simple. Workers can adjust in real time according to the specific polishing conditions. They are mostly used for products with high quality such as crafts.

3. Diamond polishing

Diamond polishing machines are more used in the flow-type polishing process, using diamond machine polishing efficiency is high and the effect is good, for large-scale acrylic products polishing can use diamond polishing machine for processing. It is worth noting that you can check the diamond knife and adjust the size specifications before each use.

4. Manual polishing

For the subtle positions that cannot be reached by the above three machines, manual polishing can be adopted. Hand co-polishing is relatively slow and is suitable for polishing high-quality subtle parts.

Precautions:

Generally speaking, acrylic board polishing is to add polishing wax to the worn part, and to make the polishing wax evenly cover the worn part through the polishing process. In theory, polishing is different from cutting, and there will be no dimensional changes. However, if the polishing process is concentrated, the thickness and size of the acrylic board may change, so it is recommended to handle it evenly when polishing manually.

Different polishing processes can be adopted for acrylic plates of different thicknesses. In terms of manual and mechanical processing, acrylic plates with a thickness of more than 5mm can be polished and maintained manually. However, after manual polishing of acrylic plates with smaller thicknesses, there may be As a result of damage, the cost is far less than the benefit of buying a new acrylic board. It is recommended to consult relevant companies for consultation.

Prev：How the special-shaped acrylic products been processed?
Next：Over！