The method of scratching in the process of acrylic processing
In general, the acrylic sheet is protected on both sides when it is produced. So be careful when we're working, there is usually no scratch. But what if you noticed these problems and inevitably have scratches? Here the response will tell you how to deal with it.
1. For small scratches, there is a polish on the market, but the effect is only limited to minor scratches.
2. If it is accidentally scratched during processing, we can use a flame to polish it. Remember not to burn too long when performing the flame polishing. Sweep the flame lightly in the scratched area. Acrylic plates are prone to electrostatic adsorption of dust, so the cleaning work must not be sloppy. When cleaning, be sure to use a soft cotton cloth to wipe with 1% soapy water.
3. If the scratch area is relatively large, it can be polished with a cloth wheel polisher. It is only necessary to apply wax on the cloth wheel, and then it can be resumed by scratching the surface. This method is relatively fast.
Acrylic exhibition rack scratch treatment method
Acrylic display rack scratches will affect the overall aesthetics of the display, especially transparent acrylic display stands, and it will look very obvious. It is difficult to cover scratches. It's a pity to throw away a little bit of scratch, and if you ignore it, it will have a negative effect on the display of your product. So how to solve the problem of acrylic display rack scratches?
1. For small scratches, the usual way is to wipe the scratched part with cotton cloth and paste some toothpaste. After repeated wiping, it can remove the scratch and restore the original color and brightness of the acrylic display rack.
2. Diamond polishing has the most obvious effect of this treatment method, but it also has certain limitations. Diamond polishing costs are higher, and when the surface is too large, the diamond polishing machine is not so large. Generally in the processing of acrylic products, the side of the polishing treatment is to use diamond polishing, brightness with the light transparency of the plate. So a lot of cosmetics display rack, display stand, the bakery display stand, basically is through diamond polishing treatment.
3. If it is a relatively deep scratch, we must use the finest water-based sandpaper to add water, and then we will grind all the scratches and polish it with a cloth wheel polisher. It should be noted that because the scratches are too deep, the polished surface will be a little pitted in order to cover the scratches.
In fact, there are more than just scratches on the acrylic display racks. Almost all acrylic products are scratched. If you want acrylic crafts not scratched, you can use acrylic processing with strong scratch resistance. Ordinary acrylic products should pay attention during transportation and use. In addition, it is very important to learn the maintenance knowledge and scratch treatment methods of acrylic products.
Prev：How to Make Acrylic Crystal Words
Next：How Does the Display Stand Manufacturer Make Acrylic Balls?
