The acrylic display is not just for the display of products, but to
carrying the brand awareness, and the company's image at most of the time. Therefore, there are silk printing company logo or product description
on the acrylic display frame. Screen printing is generally
used for simple logo printing in a single color, because the
operation is relatively simple, it is the most common printing method in acrylic products printing, and is also a relatively cheap preferred printing
method. Now, more and more brands are choosing to use
artificial silk printing instead of the texture of painting when they are
customizing the display frame. But plexiglass screen
printing does not seem that simple. In the silk
screen process, responsy screen printing group of technical staff will
encounter many problems, such as acrylic base film residual membrane problem.
How did this problem come into being? In order to overcome this
technical difficulty, the silk screen colleagues looked for the following
reasons and came up with the way to deal with it.
Reason 1: The types, wavelengths and light intensity of the exposure light sources are chosen improperly, and the exposure is not strong or inadequate.
Coping methods: pay attention to
exposure conditions, and carry out exposure tests to adjust the exposure time.
Reason 2: The time interval between the preparation and use of photosensitive emulsion is too long.
Coping methods: Shorten the interval of use.
Reason 3:Incorrectly mastering the time, method and strength of the punching plate.
Coping methods: Correct control of the time, method and strength of the punching plate.
Reason 4:Development time is not enough.
Coping
methods: To increase the development time reveals the
graphics and textures.
Reason 5:When you print plate and the film contact does not seat.
Coping
methods: Adopt vacuum suction to make it close.
Reason 6: Drying temperature is too high.
Coping
methods: The drying temperature is controlled
according to the instructions of the photoreceptor.
Reason 7:Coating inhomogeneity
Coping
methods: Increase the tension of the screen, evenly
apply the glue on the reticle.
Here show the silk screen steps:
1.Place the material to be printed
2.Wiper screen
3.Take out carefully
4.Dry by airing
The customer's eye is bright as snow, silk screen details although
small, but for every detail display defects can’t be ignored. The experience of responsy sharing let the residue of the acrylic film
screen problem is no longer exist. Our goal is to
build each of the acrylic display shelves to attract consumers' eyeballs when
they are displayed at the end of the product, and give people the feeling of a
bright eye, so as to achieve the purpose of the product display. Choose us is to choose counterpart with the high quality.
Prev：Silkscreen printing-a beautiful dot of acrylic products
Next：How to Make Acrylic Crystal Words
